60" Slick 580 CNC
The evolution of our legendary Slick design continues with the release of the updated 60" Slick 580 CNC! Low and slow or fast and aggressive, the new Slick is well tested and highly refined, informed by close to a decade of experience with this airframe. Featuring a carbon reinforced skeleton and two eye-catching Ultracote schemes, the Slick 580's appearance matches its incredible performance. Paired with T-Motor power combo and a 6S 3300-4000 mah battery, the Slick is a lethal 3D/XA weapon to add to your arsenal!
The removable wing panels are mounted on a carbon fiber wing tube and are fastened to the fuselage with our newest CNC quick locking wing latch system. New tail assembly allows EASY installation for the best results with the least amount of effort. All control surfaces are pushrod driven with short linkages and use ball links for slop free actuation with no binding. Optional quick assembly side force generators are included and add to the already generous side area, increasing yaw axis authority and adding stability in all angles of sideslip.
Ailerons and elevator prehinged and sealed. 63mm cyclone spinner included. Expertly painted fiberglass cowl and wheel pants in 2 gorgeous high visibility Ultracote color schemes add the finishing touches and make this an airplane that you will be proud to show up at the flying field with. Couple the Slick with the T-Motor AM600 combo and be prepared for ballistic vertical performance!
- Length: 58.5 inches
- Wing Area: 680 sq. in.
- Weight: 5 - 6lbs
- Recommended completion items:
- Motor: T-Motor AM600 Motor
- ESC: T-Motor AM116
- Prop: 16x8
- Battery: 6S 3300- 4000mAh LiPo
- Spinner: EF Cyclone 63 mm spinner INCLUDED
- Modern 5 channel computer radio
- Servos: 4 metal geared mini servos (Savox SV1261MG, Theta 989)
- Servo Arms: 4 Lightweight EF Servo Arms - 1.25"
- Extensions: 2 Extreme Flight 6 inch 28 AWG for ailerons,
- 2 Extreme Flight 18 inch 28 AWG for elevator and rudder
